Loading... Please wait...

Add to Wish List

Click the button below to add the Aimpoint Patrol Rifle Optic PRO WITH QRP MOUNT (1005773) to your wish list.

Aimpoint Patrol Rifle Optic PRO WITH QRP MOUNT (1005773)

  • Image 1
  • Image 2
1.00 LBS
Calculated at checkout

Sorry but this item is currently unavailable.

Please check back at a later stage.

Product Description

A hard-anodized 30mm tube was utilized, enclosing a high efficiency circuit that allows the sight to be turned on and left on for up to three years using a single battery.

The front lens utilizes a unique band-pass coating, which allows the sight to be used with all generations of night vision devices. The modular QRP2 mount includes a removable spacer that indexes the sight at the optimal height for co-witness with the standard iron sights on AR15/M16/M4 Carbine style weapons. This spacer can be removed to enable the use of the sight on police shotguns or sub-machineguns. The QRP2 mount also incorporates a torque-limiting twist knob that provides the optimal level of pressure on the rail while completely eliminating the possibility of over-tightening. Both the front and rear lenses are recessed within the sight body to provide protection against impact damage, scratches, and fingerprints.

Flip covers are included to further protect the lenses, and a transparent rear lens cover is utilized allowing the user to engage a target with the lens covers closed in an emergency situation. A two Minute of Angle (2 MOA) red dot is utilized to allow maximum accuracy at all distances and under all environmental conditions.

Unique features for Patrol Rifle Optic

• Always ready - always on. Turn it on for up to 3 years using one single battery.
No need to fumble with switches prior to use.
• 2 minute of angle red dot for accurate target engagement at all distances.
• In service date and battery change date reminders makes inventory tracking
and maintenance easy.
• Enhanced speed on target and increased first shot hit probability when compared
to iron sights and magnified scopes.
• Compatible with all generations of night vision devices and may be used with
Aimpoint 3X Magnifier and Concealed Engagement unit.
• Hard anodized aluminum alloy housing. Rugged enough for real world
conditions and waterproof to 150 feet.
• Threaded front lens opening allows use of screw-in anti-reflection device (ARD).
• Front and rear flip covers keep lenses clean.
• Transparent rear flip cover allows use of the sight (with both eyes open) even with
both covers closed in an emergency.
• Battery and adjustment cap retainer straps means you will never lose your pieces.
• Modular mount set up for use on flat-top AR15, M4 Carbine and M16 rifles.
(Adapter available for carry handle mounting)
• Removable spacer. Remove for use on shotguns and sub-guns.
• QRP2 rail grabber mount. Snap knob three times for a perfect mount.
Will not deform your rail like many other mounts.
• Recessed lens openings helps prevent against impact damage,
fingerprints and scratches.

Law Enforcement carbines, rifles, shotguns and submachineguns




Article number



ACET (Advanced   Circuit Efficiency Technology)

Working principle

Reflex collimator   sight - red dot sight



LED (Light Emitting   Diode) totally eye-safe

Lightsource   wavelength

650 nm red light

Red dot size in MOA   (minute of angle)*



Absence of parallax   -
  No centering required

Eye relief


Night vision   compatibility


Anti-reflex coating   all surfaces & multi-layer coating objective lens



No magnification   (1X)



One 3V Lithium battery,   type 2L76 or DL1/3N

Battery life in   hours **

30 000 (over 3 years   of continuous use)

Dot intensity   adjustment

Manual rotary switch

Daylight (DL)   settings

6 DL of which one   extra bright

NVD settings



Material housing

High strength   aluminum

Surface finish

Hard anodized, matte

Color housing


Adjustment 1 click

13mm at 100m, (1/2”   at 100yds)

Mounting methods

QRP2 mount for M1913   atandard Picatinny rail, and spacer for AR15/M4 carbine application


Temperature range

-45° - +71° C, (50°-   +160° F)

Water resistance -   submersible to

45m, (150ft)

Radioactive   components used




130mm, (5.1”)

Width/height sight   only

55 x 55mm, (2.2” x   2.2”)

Maximum ring width

30mm, (1.18”)

Objective diameter

38mm, (1.5”)

Tube diameter

30mm, (1.18”)

Weight sight only

220g, (7.8oz)****

Weight sight with   integrated mount

11.6 oz including   mount and spacer

* 1 MOA ˜ 30 mm at 100 meters ˜ 1” at 100 yards.

** at room temperature & at setting 7 out of 10.

Specifications are subject to change without notice.

Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Our Newsletter